Many people have this question after purchasing a home elevator, and they are more entangled in the installation. Then, based on previous installation experience, I recommend some suitable installation places for everyone, and follow this article to find out.
First, if the staircase in the home is a three-sided circular staircase, and the position of the staircase is ≥1000 * 1000, then using this position to install the elevator is the best solution, that is, it does not occupy the size of the home position, and it will not destroy the pattern. The elevator shaft seals the free space in the middle of the staircase and also plays a role of safety protection.
Second, there are also many villa apartment staircases that are on both sides, so only other options are available to install the elevator. If there is no more suitable location in the home, you can negotiate with the property, choose an external home improvement elevator, choose the appropriate location size in your own garden, and the shaft should be close to the wall of the house and stand straight up. This shaft can be used as a civil shaft by itself (requirements for civil shafts. It has a thickness of 20 minutes, and requires concrete-filled columns and ring beams. It can also be used as a sightseeing shaft (200㎜ * 200㎜ steel pipe is recommended for external sightseeing shafts). The construction method can be produced free of charge.
Third, if the staircase in the home is a three-sided round-shaped staircase, and the position of the staircase opening is ≥1000 * 1000, then using this position to install the elevator is the best solution, that is, it does not occupy the size of the home position and does not destroy the pattern. The elevator shaft seals the free space in the middle of the staircase and also plays a role of safety protection.
Fourth, there are also many villa apartment staircases that are on both sides of the stairs. In this way, only alternative solutions for home improvement are available. If there is no more suitable location in the home, you can negotiate with the property, choose an external home improvement elevator, choose the appropriate location size in your own garden, and the shaft should be close to the wall of the house and stand straight up. This shaft can be used as a civil shaft by itself (requirements for civil shafts. It has a thickness of 20 cents, and requires concrete-filled columns and ring beams. It can also be used as a sightseeing shaft (200㎜ * 200㎜ steel pipe is recommended for external sightseeing shafts).
Fifth, if the location of the home improvement elevator fails to meet the above two suggestions, you can contact the relevant elevator professionals to visit the site to design, or communicate with the home improvement designer to change the decoration plan appropriately, leaving more than 1000 cubic meters can be installed.
Recent Comments